Enabling Dma For Windows 2000 Professional - IBM 40X Benutzerhandbuch

Enabling DMA for Windows 2000 Professional

To change the parameter setting for Windows 2000, do the following:
10. Click Close to close the System Properties window. A message is displayed
11. Click OK to restart your computer.
26
40X/12X/40X Max CD-RW-Laufwerk: Benutzerhandbuch
1. Click Start Settings
2. Double-click System.
3. Click the Hardware tab.
4. Click Device Manager.
5. Click the IDE ATA/ATAPI controller to expand the tree.
6. Click the device that corresponds to the controller where your CD-RW Drive
is located (Primary IDE or Secondary IDE).
7. Click the Advanced Settings tab.
8. Click Transfer Mode, and select DMA if it is available.
9. Click OK.
informing you that the system settings have changed.
Control Panel.