There Is No Sound From The Cd; The Connectors On The Audio Cables Provided Do Not Fit The Connector On Your Audio Adapter; You Receive "Buffer Underrun" Error Messages When Copying Cds Or Making Data Cds - IBM 40X Benutzerhandbuch

There is no sound from the CD.

Take the following actions:
1. Check that you are using an audio CD and not a data CD.
2. Adjust the sound-adapter volume control. See the documentation that comes
3. Turn off the computer, unplug the cables from the electrical outlets for your
The connectors on the audio cables provided do not fit the
connector on your audio adapter.
Some audio adapters might require a special cable. See the documentation that
comes with your sound adapter.
You might have to purchase a separate audio cable for the 40X/12X/40X Max
CD-RW drive. The audio-out connector on the 40X/12X/40X Max CD-RW drive
requires a MPC-2 compliant Molex 70553 or equivalent connector. (To locate the
drive audio connector, see „Rückansicht des Laufwerks" auf Seite 4.) If you are
using an IBM computer or IBM sound adapter, see „Service and Support" auf Sei-
te 27 for assistance.
You receive "buffer underrun" error messages when copying
CDs or making data CDs.
Take the following actions:
v If the file source is a network or removable device, copy the files to the local
v If using CD copier, select Advanced and check the Copy to Hard Disk option.
v If using RecordNow, select Options->Advanced, and make sure that Burn-Proof
v Try reducing the write speed.
v Make sure the source and target drives are being operated in DMA mode. See
24
40X/12X/40X Max CD-RW-Laufwerk: Benutzerhandbuch
with your sound adapter and audio-CD player program.
computer and all attached devices, and remove the computer cover. Check that
the audio-signal cable connects the 40X/12X/40X Max CD-RW drive to the
sound adapter.
hard disk first.
is checked.
Anhang C, „Customizing the device-driver configuration settings" auf Seite 25
for more information.