Herunterladen Inhalt Inhalt Diese Seite drucken

Kingstone EASY 32 Handbuch Seite 35

Holzkohletischgrill
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 5
1. Scope of delivery
The package contains the following
components:
1) Instruction manual (this brochure!)
2) Grill rack (A)
3) Lid for charcoal container (B)
4) Charcoal container (C)
4) Ignition plate (D)
5) Inner plate (E)
6) Outer plate with integral battery
compartment (F)
7) Locking clips (G)
8) Combined On/Off switch for ventilati-
on and heat control with
light indicator (H)
9) Four batteries AA 1.5 V (I)
10) Battery compartment cover (J)
11) Transport pocket (K)
• Check the content of the packaging to
ensure everything is there.
• Check the components for any dama-
ge suffered in transit.
Important
Packaging material is not a
toy. Children must not play
with plastic bags, foils, small
parts or the like. Risk of
asphyxiation!
2. Introduction
Familiarize yourself with the parts of
your Party Fridge before assembling.
Keep the instructions for use for consul-
tation should any questions arise. Keep
these for reference purposes and pass
them on to every subsequent user.
The following safety instructions indicate
a few points which you must observe in
all circumstances:
GBR
Prohibited
Not to be done
Danger
Hazards, warnings
Note
Information, instructions
3. Designated use
This tabletop charcoal grill can be used to
prepare dishes and must only be emplo-
yed for its intended use.
The tabletop charcoal grill is only intended
for private use!
4. Information
Caution
Read all of these safety
instructions through care-
fully before using. Follow
all instructions. Failure to
observe instructions can lead
to serious injury and major
damage!
4.1 Prior to assembly
Please read the following installation and
safety instructions carefully. Take suffici-
ent time to assemble the tabletop grill.
Before starting, clear a working surface
measuring about two to three square
metres. Before being used, the tabletop
grill must be placed on firm, level ground.
Remove all components from their
packaging. Place all required components
in their correct locations.
5. Installation
• Open the battery compartment in the
base of the outer shell (F). Install the
four AA batteries (G). Check for correct
polarity. Close the battery compartment.
35

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis