Specifications - Berner Rotating Laser Multi HV-R Bedienungsanleitung

• While the instrument is operating, be careful not to expose your eyes to the
laser beam. Direct exposure to a laser beam for a long time may be hazardous
to your eyes. The laser beam of Multi HV-R is equivalent to a class II.
• Operate this laser so that the laser beam plane avoids impact on the eyes of
vehicle drivers or pedestrians.
• Do not try to dismantle the instrument. Have it repaired by your dealer or
supplier. Dismantling yourself may worsen the problem or void your warranty.
• When attaching the instrument to a tripod, make sure the instrument is
securely fixed. The tripod leg clamps should be securely fastened. If not securely
fastened or tightened, the main unit could fall off or the tripod could fall over.
• The laser should not be stored or used in extreme temperature or during rapid
temperature change. The laser may not function properly if used out of the
ambient temperature range.
• Store inside the carry case and place in a dry area not subject to vibration,
dust or high moisture.
• If the storage temperature and ambient temperature for usage very signifi-
cantly, leave the laser in its case until it can adjust to the ambient temperature.
• The laser should be transported or carried carefully to avoid impact or vibration.
• The laser should be stored in the carry case and packed with cushioning
material. Always handle the laser with care.
• Never put a wet laser in carrying case.
Accuracy
Self leveling range
Operation range (with detector)
Laser source
Rotational head speed
Power Supply
Continuous working time
Operation temperature
Weight
Dimension
Protection class
Accuracy with Receiver
IR Remote control
Rotating Laser Multi HV-R single device - Art.-No.245071
4
ATTENTION

SPECIFICATIONS

0,60,120,300,600 U/min
Accu-pack with charger (charger socket on the display)
Multi HV-R
± 1mm @ 10m
± 5°
Ø 500 m
635 nm, Kl. 2, rot
20 h
-20°C bis +50°C
3,8 kg
202x202x194 mm
IP56
± 2 mm / ± 1 mm
Infrarot, 20 m