Technical Specification; Installation - KKT KOLBE SUPERKERAMIK KFS7725AL Benutzerhandbuch

Technical specification, Installation

14. Technical specification

Model
Cooking Zones
Supply Voltage
Electrical power
Product Size L×W×H(mm)
Built-in dimension
Weight
Weight and Dimensions are approximate. Because we continually
strive to improve our products we may change specifications and
designs without prior notice.

15. Installation

Cut out the work surface according to the sizes shown in the drawing.
For the purpose of installation and use, a minimum of 50mm space
shall be preserved around the hole.
Be sure the thickness of the work surface is at least 30mm. Please
select heat-resistant work surface material to avoid larger deforma-
tion caused by the heat radiation from the hotplate. As shown below:
L(mm) W(mm)
770 520
Note: Before carving, check that the dimensions indicated
correspond to the dimensions of the product.
KFS7725AL/KFS7725RL
5
220-240V ~ 50/60Hz
8600W
770 x 520 x 51
740 x 490
11.2,13.2 / 11.5,13.5 kg
H(mm) D(mm)
51 46
A(mm) B(mm)
740 490
+ 4 +4
+1 +1
X(mm)
50 min.
43