Safety Instructions - Avacom JVL-305 Bedienungsanleitung

EN

SAFETY INSTRUCTIONS

Please read the instruction manual that contains important information how to use the charger.
The warranty cannot be applied if the charger gets damaged due to non-compliance with these instructions.
Use the charger only in accordance with its technical specifications.
A seller is not liable for any consequential damages to property or personal injury caused by improper use or non-compliance with
the safety instructions.
For safety reasons the charger cannot be modified nor its technical specification changed in any way.
Use the charger only for charging batteries that it's designed for. Don't try to charge batteries that can't be charged (e.g. alkaline)
battery. There is a serious risk of fire and an explosion.
The charger can be used only with the original power adapter .
The charger can be only used within a power supply range of 100V-240V, 50-60Hz.
Do not allow children to play with the charger and keep it out of their reach.
If you notice that the charger is damaged, stop using it immediately.
Do not expose the charger to temperatures lower than 0°C or higher than 40°C and the relative humidity higher than 80%.
Keep the charger always in a dry environment.
RECYCLING
After the end of the charger's service life it must be handed over to a collection point for recycling of electrical and electronic parts.
Recycling symbols are written on the product and its packaging.
TECHNICAL SPECIFICATIONS OF CHARGER
Model: JVL-305
Input: DC 12V / 1.5A
Output: DC 2 x 1.48V (Ni-MH / Ni-Cd) / 4.2V (Li-Ion), 5V (USB)
Charging Current: 500mA / 1000 mA
Discharging Current: 500mA
Designed for: 1.2V Ni-MH / Ni-Cd size A, AA, AAA, SC, C
3.7V Li-Ion, Size: 18650, 14500, 16340, RCR123A, 17500 26500, 26650, 10440, 17670, 18350, 18490, 22650
TECHNICAL SPECIFICATIONS OF POWER ADAPTER
Model: JVL-005
Input: AC 100-240V, 50-60Hz
Output: DC 12V / 1.5A (max. 24W)
Made in China for AVACOM s.r.o.