Package Content; Basic Information; Safety Instructions - Avacom HOMEMAX Bedienungsanleitung

AVACOM HOMEMAX
EN
Operating manual
Thank you for buying AVACOM HOMEMAX USB networking charger. Before using the
charger please read the operating manual.

PACKAGE CONTENT

Charger
Operating manual

BASIC INFORMATION

With AVACOM HOMEMAX charger you can charge devices via a USB connector. The
charger provides enough power to charge all demanding devices including smartphones,
tablets or navigations. Moreover, the charger enables quick charging by using Qualcomm
Quick Charge 3.0 technology. This way of charging can be used for devices supporting
this technology. To charge you device by Qualcomm Quick Charge 3.0 technology, use a
networking cable. The connected device will charge up significantly faster.
USE
Plug the charger in a socket. Connect a USB cable suitable for charging your device to the
USB output. AVACOM HOMEMAX charger is suitable for Apple devices
(iPad/iPhone/iPod), and also for smartphones with Android, Windows Phone and other
operating systems, for tablets, Power Banks, cameras, navigations etc.

SAFETY INSTRUCTIONS

Before using the charger please read the operating manual. If the charger is damaged due
to non-compliance with the operating manual the buyer is not entitled to warranty. The
seller is not responsible for any subsequent damage to property or injuries caused by the
misapplication of the charger or by not following the safety instructions. It is forbidden to
dismantle the charger or modify or adjust its properties. Do not allow children to
manipulate the charger and keep it away from them. If the charger seems damaged, it is
overheating or does not work properly stop using it and contact your seller. Do not expose
the charger to temperatures below 0 °C and above 40 °C and to relative air humidity of
more than 80 %. Keep the charger in a dry place.
RECYCLING
Once the charger is at the end of its life take it to a waste collection point for recycling. You
can find the recycling symbols on the product and its package.
TECHNICAL SPECIFICATION
Input: AC 100-240V 50/60Hz 0.7A
Output: 1x USB
5V/3A or QC 3.0 (3.6-6V/3A or 6.5V-9V/2.5A or 9-12V/1.5A)
Made in China for AVACOM s.r.o.