Herunterladen Inhalt Inhalt Diese Seite drucken

Sicherheitshinweise; Safety Instructions; Sécurité D'utilisation - Tunze led marine eco chic 8811 Gebrauchsanleitung

Inhaltsverzeichnis

Werbung

12

Sicherheitshinweise

Ein direkter Blick in die TUNZE
LED kann den Augen
®
schaden, Augen vor Blendung schützen! (1)
Leuchten Sie nicht mit der TUNZE
LED auf eine
®
reflektierende Oberfläche.
TUNZE
LED nur in Innenräumen einsetzen, der Betrieb
®
im Freien ist nicht zulässig.
TUNZE
LED nur mit dem originalen TUNZE
®
®
6095.240 betreiben.
Netzteil 6095.240 nur an trockener und gut belüfteter
Stelle anbringen!
Nicht in der Nähe von Heiz- und Wärmequellen
aufstellen (2), Umgebungstemperatur max. + 35°C (3).
Kabel nicht knicken .
Vor Inbetriebnahme prüfen, ob Betriebsspannung mit
Netzspannung übereinstimmt.
Nicht an Fremdgeräte anschließen.
Gebrauchsanleitung gut aufbewahren.

Safety instructions

Looking directly into the Tunze
Therefore, protect the eyes from glare! (1)
Do not shine the Tunze
LED onto a reflective surface.
®
Only use the Tunze
LED indoors. Outdoor
®
operation is not permitted.
Only operate the Tunze
LED with the original TUNZE
®
Netzteil
power supply unit 6095.240.
Only position the power supply 6095.240 in a dry and
well ventilated place!
Do not place it near heat sources of any kind (2).
Ambient temperature should not exceed 35°C (3).
Do not fold the cable.
Before commissioning, check that the operating voltage
corresponds to the mains voltage.
Do not connect to external devices.
Please retain the instruction manual for future reference.
Sécurité d'utilisation
LED can harm the eyes.
Un éblouissement direct par TUNZE
®
causer des dommages aux yeux, se protéger de
l'éblouissement! (1)
Ne dirigez pas TUNZE
réfléchissante.
TUNZE
LED n'est pas conçu pour une utilisation hors
®
®
habitation.
N'utilisez TUNZE
TUNZE
6095.240 originale.
®
Placez l'alimentation secteur 6095.240 dans une zone
sèche et parfaitement ventilée!
Ne placez pas TUNZE
chaleur (2), température ambiante max. +35°C (3).
Ne pas plier le câble.
Avant toute mise en service, vérifiez que la tension
d'alimentation corresponde bien à celle du réseau
électrique.
Ne pas raccorder à des appareils externes.
Veuillez attentivement consulter la notice d'entretien.
LED peut
®
LED sur une surface
®
LED qu'avec son alimentation
®
LED à proximité d'une source de
®
13

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis