Radio Frequency (Rf) Exposure Information; Warning Explosion Hazard; Laserprodukt Der Klasse 1 - Endress+Hauser Field Xpert SMT70 Betriebsanleitung

Anhang
doit pas causer d' i nterférence et (2) cet appareil doit accepter toute interférence, notamment
les interférences qui peuvent affecter son fonctionnement.
14.2.1

Radio Frequency (RF) Exposure Information

The radiated output power of the Wireless Device is below the Industry Canada (IC) radio fre-
quency exposure limits. The Wireless Device should be used in such a manner such that the
potential for human contact during normal operation is minimized. This device has been eva-
luated for and shown compliant with the IC Specific Absorption Rate ("SAR") limits when
installed in specific host products operated in portable exposure conditions.
Informations concernant l' e xposition aux fréquences radio (RF) La puissance de sortie émise
par l'appareil de sans fil est inférieure à la limite d' e xposition aux fréquences radio d' I ndustry
Canada (IC). Utilisez l'appareil de sans fil de façon à minimiser les contacts humains lors du
fonctionnement normal. Ce périphérique a été évalué et démontré conforme aux limites SAR
(Specific Absorption Rate – Taux d' a bsorption spécifique) d' I C lorsqu' i l est installé dans des
produits hôtes particuliers qui fonctionnent dans des conditions d' e xposition à des appareils
portables.
14.3

Warning Explosion Hazard

Class I, Division 2, Groups A, B, C, D, T Code T5
Model R11XXXXXX, Rugged Tablet PC, Battery Powered (Battery P/N R11AH or
R11AH2XXXXXX rechargeable lithium-ion battery pack),Ambient Temperature Range: 0°C to
+40°C. Note: The "X" in the model designations may be any alphanumeric character or blank
denoting minor mechanical options, system configuration options and/or safety extra low vol-
tage secondary circuit options.
Conditions of Safe Use:
Connection to or from this device, which enters or leaves the system enclosure, must be completely restricted in Class I,
Division 2 Hazardous Locations.
Rugged Tablet PC is to be charged by the supplied charging adaptor, type FSP065-RAB, manufactured by FSP Group, in
Non-Hazardous Location only.
Suitable for use in Class I, Division 2 Groups A, B, C and D hazardous locations or non-hazardous locations only;
"WARNING - EXPLOSION HAZARD - SUBSTITUTION OF COMPONENTS MAY IMPAIR SUITABILITY FOR CLASS I, DIVI-
SION 2."
AVERTISSEMENT - RISQUE D' E XPLOSION – LA SUBSTITUTIOND E COMPOSANTSP EUTR ENDRE CE MATERIEL INAC-
CEPTABLE POUR LES EMPLACEMENTS DE CLASSE I, DIVISION 2.
"WARNING: TO PREVENT IGNITION OF A HAZARDOUS ATMOSPHERE, BATTERIES MUST ONLY BE CHARGED IN AN
AREA KNOWN TO BE NON- HAZARDOUS."
"AVERTISSEMENT- RISQUED ' E XPLOSION- AFIN D' E VITER TOUT RISQUE D' E XPLOSION, S' A SSURER QUE L' E MPLACE-
MENT EST DESIGNE NON DANGEREUX AVANT DE CHANGER LA BATTERIE."
"WARNING - EXPLOSION HAZARD - DO NOT CONNECT OR DISCONNECT WHILE CIRCUIT IS LIVE UNLESS AREA IS
KNOWN TO BE NON- HAZARDOUS."
"AVERTISSEMENT - RISQUE D' E XPLOSION. NE PAS BRANCHER OU DÉBRANCHER TANT QUE LE CIRCUIT EST SOUS
TENSION, À MOINS QU' I L NE S' A GISSE D' U N EMPLACEMENT NON DANGEREUX."
14.4

Laserprodukt der Klasse 1

Produkt der Laserschutzklasse 1 gemäß EN 60825
42
Field Xpert SMT70
Endress+Hauser