Herunterladen Diese Seite drucken

How To Use - Braun Identity Collection JB 5050 Jug Blender Gebrauchsanweisung

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Speed Applications (see table page 3)
I
light applications with liquid ingredients – mixing small amounts of liquids and/or solid
ingredients
II
for thicker consistency and fi nest results
pulse: instant power bursts
(The rotary switch does not catch at this setting. Hold the rotary switch in pulse position
or turn it to pulse position repeatedly.)
Attaching the jug
• Make sure that the rotary switch is in the «O»
position.
• Place the jug on the power base and push it
down until it is securely locked into place.
• Before removing the jug from the power base
always turn the rotary switch to the «O» position
and unplug the power base after use.

How to use

• Put the food to be processed into the jug.
• Place the lid fi rmly on the jug. Insert measuring
cup fi rmly into the lid opening.
• Turn the power base on.
Recipe example:
Raw vegetable soup
Cut 750 g carrots into cubes and fi ll them into the
jug. Add 750 ml water, seasoning and herbs.
Mix for 5 seconds at maximum speed.
For best results
• When puréeing with solid ingredients, feed small
portions into the jug gradually rather than adding
a large quantity at one time.
• When mixing solid ingredients, cut them up into
small pieces (2–3 cm).
• Always start by mixing solid ingredients with a
small amount of liquid. Then gradually add more
liquid through the opening in the lid.
• When preparing mayonnaise, oil can be added
through the drip hole in the measuring cup.
• Use the pulse mode when mixing solid or highly
viscous ingredients to avoid the blade becoming
stagnant.
• Always operate the unit with your hand
positioned on the top.
• Maximum capacity 1.3 l for hot soup and 0.8 l for
milk.
• For preparing small amounts of foodstuff use
speed level one.
Cleaning
Power base
Do not immerse the power base in water.
Wipe clean with a damp cloth only.
Easy cleaning/rinsing of assembled jug
After emptying the jug, fi ll it with water. Place it on
the power base and turn the rotary switch to the
« » setting several times.
Empty the jug and rinse clean.
Thoroughly cleaning the disassembled jug
Make sure the jug is empty before you unscrew the
fastener ring (f). Handle the blade with caution.
All detachable parts are dishwasher-safe.
For an effi cient cleaning of the lid, remove the lid
gasket (c).
Subject to change without notice.
Please do not dispose of the product in the
household waste at the end of its useful life.
Disposal can take place at a Braun Service
Centre or at appropriate collection points
provided in your country.
7

Werbung

loading

Diese Anleitung auch für:

Typ 4125