Hama DR-20 Installationsanleitung Seite 8

L L
Installation instructions:
Before you begin, make sure that you have received your DSL user data from your Internet
provider. You also require an additional ADSL modem with an Ethernet connection.
Caution!
The external ADSL modem may not be a USB device; otherwise you cannot use our router
will it!
In the box:
1x Hama DR-20 DSL/broadband router with integrated USB print server
1x Power supply unit
1x Driver CD-ROM
1x Assembly material for wall attachment
1x Operating instructions printout
1. Installing the Hardware
Using network cable, connect your external ADSL modem to the terminal with the name
WAN at the back of the DR-20 DSL/broadband router. Where possible, use a CAT 5 STP net-
work cable to ensure a smooth connection.
Connect the computer(s) that you would like to connect to the Internet using the router.
Insert a suitable network cable (patch or crossover cable CAT5 STP) in your network card on
the PC and connect the other end to the terminal with the numbers 1 – 4 at the rear of the
DR-20 DSL/broadband router.
LED Status
WAN Illuminated The WAN port has generated a correct Internet connection
Flashing
Off
LAN1-4 Illuminated The corresponding LAN port has generated a correct network connection
Flashing
Off
USB Illuminated A USB device is connected
Off
POWER Illuminated Power unit is connected and supplying electricity
Off
Plug the power unit supplied into an empty socket and connect it to the DR-20 DSL/broad-
band router.
Caution:
Only use the power unit, which is supplied with the product.
Explanation
Data transfer via WAN port
No connection
Data transfer via respective LAN port
No connection
No USB device is connected or recognized
No power unit connected, device not being supplied with electricity
9