Inhaltsverzeichnis
Werbung
GTs 6902 A
Settings
The following control setting is recommended as basic set-
ting before putting the device into operation: Sensitivity
1
(gain) Pos.
to minimum, phase Pos.
3
over) Pos.
to approx. 80 Hz. Switch on the device and
select a musical piece with distinctive bass playback.
Increase the volume of your stereo system to the desired
volume level. Now slowly increase the gain control
you can hear a clear amplifi cation of the bass level. Next, use
3
the crossover control
to select a fi lter setting that provides
a well-contoured bass. You may have to alternately optimise
1
the gain control setting
A droning bass with excessive volume requires a fi lter setting
with a low frequency.
The phase switch must be set so that the bass is integrated
into the acoustic pattern as best as possible and not recog-
nisable as an individual source.
Also check your settings of the GTs 6902 A with the bass con-
trol fully open and, if necessary, with activated loudness. An
overloading of the subwoofer box by selecting an excessive
1
amplifi cation (pos.
) results in a distorted playback and can
damage the loudspeaker.
Recycling and disposal
Please use the return and collection systems avail-
able to dispose of the product.
Subject to changes!
30
2
to 0°, fi lter (cross-
1
3
and the fi lter setting
.
until
Quicklinks ausblenden:
Werbung
Inhaltsverzeichnis
