Technical Data; Noise/Vibration Information - Kress PSX 550 Bedienungsanleitung

Kress PSE 500 - Buch Seite 7 Dienstag, 18. September 2001 10:49 10
PSE 500, PSX 550
Application
The Pneumatic Drill Hammer can be used universally
for impact drilling, for light chiselling work in masonry
and for drilling as well as screwdriving in wood, metal
and plastic.
Safety Instructions and
1
Accident Prevention
Before putting the machine into operation, read
through these operating instructions completely and
observe the safety instructions contained therein as
well as those in the enclosed booklet on general
safety instructions for electro-tools.
If the mains cable is damaged while working, pull
the mains plug immediately.
Never work with a damaged mains cable.
Wear protective glasses, hearing protection, pro-
tective gloves and sturdy shoes.
For safety reasons, work only with the auxiliary
handle 12 mounted.
Do not work with materials containing asbestos.
Do not carry the machine by the cable.
The mains receptacles in the working area must be
protected by a residual current circuit breaker (RC).
For the attachment of identification markings on the
machine, do not drill into the housing. The protec-
tive insulation would be shorted. Use stickers.
When the drill unexpectedly jams, the machine
kicks back. Therefore, always take a secure stance
and hold the machine firmly with both hands.
2 Illustration
1 Tool holder
2 Dust protection cap
3 Unlocking collar
4 Gear selector/Rotation stop switch
5 Locking button for on/off switch
6 On/Off switch/Speed control
7 Ventilation slots
8 Latch for mains cable module
9 Rotational direction switch
10 Drilling/Impact drilling selector
11 Holder for depth stop
12 Auxiliary handle
13 Adapter for screwdriver bits/drill chuck
Accessories illustrated or described are not always
included as standard delivery items.
3

Technical Data

Pneumatic Drill PSE 500
Hammer
Article number 0428 2601
Input power 500 W
Output power 200 W
•
Electronic speed control
No-load speed
1st Gear 0-950 RPM
2nd Gear ---
Speed under load
1st Gear max. 0-730 RPM
2nd Gear max. ---
No-load impact rate 4700
per min. max.
Impact energy 2.1 J
•
Right/Left rotation
Clamping collar dia. 43 mm
Euro standard
Tool holder SDS-Plus
Drill dia., max.
Steel 13 mm
Light metal 15 mm
Wood 30 mm
Hammer drilling in
conctrete 20 mm
Recommended
hammer drilling range 4-12 mm
Screw dia., max.
Wood 6 mm
Sheet metal 6.3 mm
Weight 2.75 kg
Protection class
II/
4

Noise/vibration information

Measured values determined according to
EN 50 144.
Sound pressure level: 84 dB (A)
Sound power level: 97 dB (A)
Workplace related emission value: 87 dB (A).
For operation, noise protection measures are
required.
The weighted acceleration is typically 8.6 m/s
English
7
PSX 550
0428 2701
550 W
250 W
•
0-950 RPM
0-2000 RPM
0-680 RPM
0-1540 RPM
4700
per min. max.
2.1 J
•
43 mm
Euro standard
SDS-Plus
13 mm
18 mm
35 mm
22 mm
4-14 mm
8 mm
6.3 mm
2.78 kg
II/
2
.