Hama 00062762 Installationsanleitung Seite 6

Windows Me:
Insert the driver CD in the CD-Rom drive of your PC.
The installation should begin automatically now. If
this is not the case, please open the corresponding
CD-Rom drive via My Computer and run the "en-3
std setup.exe" file. The installation menu appears
now. Please continue with <Continue/Next>. If you
confirm the window which appears now also with
<Continue/Next>, the driver will be installed auto-
matically. The installation is automatically finished
with <Finish>. Connect your Playstation controller
to the 3in1 controller adapter now. Put the USB plug
of the 3in1 controller adapter into a free USB socket
of your PC now. The controller is installed automati-
cally once it is connected. In the Device Manager
under "HID", you can check whether the adapter
has been properly integrated into the system; there
the entry "USB-HID" must appear without a yellow
exclamation point. Under Start > Settings > Control
Panel > Game Controllers you can check whether
the controller adapter is functioning properly. The
entry "3in1 Conversation Box" has to appear there.
The state should be set to "OK". Select the entry
"3in1 Conversation Box" now and click with the
mouse "Properties". A new window appears now in
which you can test the controller. You can change
the force of the "Force Feedback Effect" by clicking
the tab "Effect Page". In this window you can sel-
ect the desired force now. Confirm your settings
with > OK. Now, the adapter is installed properly
and can be used.
Windows 98SE:
Insert the driver CD in the CD-Rom drive of your PC.
The installation should begin automatically now. If
this is not the case, please open the corresponding
CD-Rom drive via My Computer and run the "en-3
std setup.exe" file. The installation menu appears
now. Please continue with <Continue/Next>. If you
confirm the window which appears now with <Con-
tinue/Next>, the driver will be installed automatical-
ly. The installation is automatically finished with
<Finish>. Connect your Playstation controller to the
3in1 controller adapter now. Put the USB plug of the
3in1 controller adapter into a free USB socket of
your PC now. When you have plugged the controller
adapter into, the "Hardware Assistant" appears
and searches for new drivers for "USB HID (Human
Interface Device)" <Continue/Next>.
Select "Search for the best driver for your device
(recommended)" Continue/Next > Continue/Next >
Continue/Next. Now you are asked to insert the
Windows98 CD in the CD-Rom drive. Please insert
the Windows98 CD and confirm with <OK>. When it
comes to certain operating system versions, it can
happen that a driver file which is already on the PC
is to be replaced by an older version. If this is the
case, please confirm the question if the newer file
is to be kept with <Yes>. The installation is finished
with <Finish>. In the Device Manager under "HID",
you can check whether the adapter has been pro-
perly integrated into the system; there the entry
"USB-HID" must appear without a yellow exclama-
tion point. Under Start > Settings > Control Panel >
Game Controllers you can check whether the con-
troller adapter is functioning properly. The entry
"3in1 Conversation Box" has to appear there. The
state should be set to "OK". Select the entry "3in1
Conversation Box" now and click with the mouse
"Properties". A new window appears now in which
you can test the controller. You can change the
force of the "Force Feedback Effect" by clicking the
tab "Effect Page". In this window you can now sel-
ect the desired force. Confirm your settings with >
OK. Now, the adapter is installed properly and can
be used.