Hama 00062762 Installationsanleitung Seite 5

L Installation instructions
To connect a Playstation controller to a Microsoft
Xbox:
If you want to connect a Playstation controller to a
Microsoft Xbox, you have to connect the controller
to the 3in1 controller adapter first. Please connect
the 3in1 controller adapter to the Microsoft Xbox
afterwards.
To connect a Playstation controller to a Nintendo
Gamecube:
If you want to connect a Playstation controller to a
Nintendo Gamecube, you have to connect the con-
troller to the 3in1 controller adapter first. Please
connect the 3in1 controller adapter to the Nintendo
Gamecube afterwards.
To connect a Playstation controller to the PC:
Please install the driver which is to be found on the
enclosed CD before you connect the 3in1 controller
adapter.
Windows XP:
Insert the driver CD in the CD-Rom drive of your PC.
The installation should begin automatically now. If
this is not the case, please open the corresponding
CD-Rom drive via My Computer and run the "en-
3std setup.exe" file. The installation menu appears
now. Please continue with <Continue/Next>. If you
confirm the window which appears now with <Con-
tinue/Next>, the driver will be installed automatical-
ly. The installation is finished with <Finish>.
Connect your Playstation controller to the 3in1 con-
troller adapter now. Put the USB plug of the 3in1
controller adapter into a free USB socket of your PC
now. The controller adapter is now installed auto-
matically. In the Device Manager under "Input
Devices", you can check whether the adapter has
been properly integrated into the system; there the
entry "HID-Compliant Game Controllers" must
appear without a yellow exclamation point. You can
check whether the adapter is functioning properly
by clicking Game Controllers under Start > Control
Panel > (in the traditional view Start > Settings >
Control Panel) > Printer and Other Hardware (in the
traditional view > Game Controllers). In the win-
dow which appears now, the entry "3in1 Conversa-
tion Box" should appear. The status should be set
to "OK". Select the entry "3in1 Conversation Box"
now and click with the mouse "Properties". A new
window appears now in which you can test the
controller. You can change the force of the "Force
Feedback Effect" by clicking the tab "Effect Page".
In this window you can now select the desired
force. Confirm your settings with > OK. Now, the
adapter is installed properly and can be used.
Windows 2000:
Insert the driver CD in the CD-Rom drive of your PC.
The installation should begin automatically now. If
this is not the case, please open the corresponding
CD-Rom drive via My Computer and run the "en-3
std setup.exe" file. The installation menu appears
now. Please continue with <Continue/Next>. If you
confirm the window which appears now with <Con-
tinue/Next>, the driver will be installed automatical-
ly. The installation is finished with <Finish>.
Connect your Playstation controller to the 3in1 con-
troller adapter now. Put the USB plug of the 3in1
controller adapter into a free USB socket of your PC
now. The controller adapter is now installed auto-
matically. In the Device Manager under "Input
Devices", you can check whether the adapter has
been properly integrated into the system; there the
entry "HID-Compliant Game Controllers" must
appear without a yellow exclamation point. You can
check whether the adapter is functioning properly
by clicking Game Controllers under > Start > Set-
tings > Control Panel. In the window which appears
now, the entry "3in1 Conversation Box" should
appear. The status should be set to "OK". Select the
entry "3in1 Conversation Box" now and click with
the mouse "Properties". A new window appears
now in which you can test the controller. You can
change the force of the "Force Feedback Effect" by
clicking the tab "Effect Page". In this window you
can now select the desired force. Confirm your set-
tings with > OK. Now, the adapter is installed pro-
perly and can be used.