Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
GB
GB
ELECTRICAL INFORMATION
CONNECTION OF THE MAINS PLUG
Important! The wires in the mains lead fitted to this product are coloured in accordance
with the following code:
If for any reason the 13 amp plug fitted to this product requires replacement it must be wired in
accordance with the following instruction:
DO NOT CONNECT THE BROWN LIVE OR BLUE NEUTRAL TO THE EARTH PIN
MARKED E
Connect the Blue wire to the terminal marked Neutral (N). Connect the Brown wire to the terminal
marked Live (L). Ensure that the outer insulation is gripped by the cord grip and that the wires are
not trapped when replacing the plug cover. The mains lead on this product is fitted with a 13 amp
(BS1363/A) plug. A 5 amp (BS1362) fuse must be fitted in the plug.
IF IN DOUBT CONSULT A QUALIFIED ELECTRICIAN.
There are no user serviceable parts inside except those referred to in the manual. Always refer serv-
icing to qualified service personnel. Never remove any part of the casing unless qualified to do so;
this unit contains dangerous voltages.
WARNING!
For your protection if this tool is to be used outdoors do not expose to rain or use in damp loca-
tions. Do not place tool on damp surfaces, use a workbench if available. For added protection use
a suitable residual current device (R.C.D.) at the socket outlet.
ON THE 3 PIN PLUG.
Brown: Live (L) or Red
Blue: Neutral (N) or Black
THIS PRODUCT IS DOUBLE INSULATED
AND THEREFORE DOES NOT REQUIRE A
CONNECTION TO EARTH.
3 PIN PLUG MUST COMPLY TO BS1363/A.
FUSE MUST COMPLY TO BS1362.
8
8
Werbung
Inhaltsverzeichnis
