Herunterladen Inhalt Inhalt Diese Seite drucken

Installation - Swim & Fun 1057 Bedienungsanleitung

Vorschau ausblenden Andere Handbücher für 1057:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 42
The water heater must be installed by a qualified technician, who is specially trained to install
hydrotherapy pools.
Water heater becomes very hot and must not be covered when in use.
Never use the pool, while the water heater is switched on, or if it is connected to a power
source. The water heater must only be used when the circulation pump is running.
The water heater is not intended for use by children, and it must be ensured that children never
play with the water heater!
This product must not be operated by persons with a mental, emotional or physical impairment
or by inexperienced individuals without the necessary product understanding. They must at all
cases be monitored by an experienced adult person with the responsibility for their safety.
It is important to periodically descale the pipe system and heater. When using hard water, calci-
um deposits can reduce the heating effect markedly as well as destroy the heating element.
Never start the water heater if there is a possibility of ice having formed in the water heater.
Take the plug out of the socket when the heater is not in use and before any cleaning. Let the
heater cool completely before touching it.
Never use the water heater if it has a damaged cable or a damaged plug - or if it is damaged in
any way. Send the heater to the dealer for examination, repair or adjustment.
This water heater is specially designed for use with spas or hot tubs. It is not designed for other
heating purposes, and must not be used for anything else.
The product can be used both indoors and outdoors. When being used outdoors the product
must be in a watertight space.
Save this manual.
3.

Installation

The water heater must be connected to the existing circulation system. Make sure that the water is
circulating in the same direction as marked on the heater.
1. The heater must be mounted horizontally. The dimensions and position can be seen in Fig. 1.
Page 36
MV-1055-1057-09-2018 www.swim-fun.com © All rights reserved Swim & Fun Scandinavia ApS 2018

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis