Storage When Not In Use; Cleaning - Silvercrest SWV 1166 A1 Bedienungs- Und Sicherheitshinweise

Storage when not in use

Q
Store the product in a dry location from dusk, protected from
direct sunlight.

Cleaning

Q
• Switch the product off, remove all plugs before cleaning!
• No acid, chafing or solvent cleaning agents should be
used or the product can be damaged.
• Only clean the outside of the product using a soft, dry
cloth!
• At persistent soiling, a mild cleaning agent can be used.
It is necessary to repair the product if they have been
damaged in any way, for example, if the housing is
damaged, if liquid or objects have penetrated the device
or if the product has been exposed to rain or moisture.
• Repair work is also required if the device is not working
properly or has been dropped. If smoke is produced, or
there are any unusual sounds or smells, turn the product
off immediately.
In such cases, the product should not be used until they
have been inspected by authorised service personnel.
Only have the device repaired by qualified personnel.
Never open the housing of the product.
• Only use a clean, dry cloth for cleaning the product and
never use any corrosive liquids. Use a slightly moistened
cloth and a mild cleaning agent to remove stubborn dirt.
58 GB / IE