Troubleshooting - Silvercrest SWV 1166 A1 Bedienungs- Und Sicherheitshinweise

Troubleshooting

Q
I may have set the Wifi repeater wrongly, and I
want to change the settings.
You need to reset the repeater. There is a small button in the
case of the repeater (at the right side of the unit).
• Plug the repeater in a power outlet and wait 1 minute
• Press the Reset button for 10 seconds. All LED's except
the power LED will turn off.
• After 2 minutes, the repeater is completely reset.
I have connected the Wifi repeater by WPS with
the internet modem, but cannot log on or don't
get the network.
Some internet modems do have a WPS button, but that is
deactivated or equipped with a different password. In that
case, you need to set the connection between Repeater and
internet modem according to "Connect the Wifi repeater to
your internet modem without WPS".
GB / IE 59