Technical Specifications - Palmer BC 400 AA Bedienungsanleitung

TECHNICAL SPECIFICATIONS

Item number:
Product type:
Type:
Maximum number of re-
chargeable AA/AAA batteries:
Rechargeable AA/AAA batter-
ies charging current (max.):
Charging time for AA/AAA
rechargeable batteries:
Maximum number of re-
chargeable 9V block batteries:
Charging current for recharge-
able 9V block batteries (max.):
Charging time for recharge-
able 9V block batteries:
Control elements:
Display elements:
Operating voltage:
Power consumption:
Protective functions:
Power supply connection:
Fuse:
Ambient temperature (run-
ning):
Relative humidity:
Enclosure material:
Enclosure color:
Dimensions (W x H x D):
Weight (without rechargeable
batteries):
Additional features:
Scope of delivery
8
PBC400AA
Stand-alone and 19" installation unit
Charger for AA/AAA and 9V block NiCD and NiMH rechargeable
batteries
4 charging trays with 4 charging bays each
(at max. 16 rechargeable batteries can be charged at the same time)
1000mA ±5%
2 to 5 hours
(depending on the rechargeable battery type used and the charging
status)
4 charging trays with 2 charging bays each
(at max. 8 rechargeable batteries can be charged simultaneously)
Charging trays for rechargeable 9V block batteries optionally available
(item no. PBC400DRA9V
35mA ±5%
4.5 to 10 hours
(depending on the rechargeable battery type used and the charging
status)
On/off switch
16 x 2-color LEDs (red/green), illuminated on/off switch
100-240V AC/50-60Hz
42W
overload protection, identifies faulty rechargeable batteries, short-cir-
cuit protection
IEC power socket
F1AL 250V (5x20mm)
0-40°C
< 80%, non-condensing
metal, plastic
black
480 x 44 x 200mm
3.02kg
4 rubber feet, preassembled.
Charging trays for rechargeable 9V block batteries optionally available
(item no. PBC400DRA9V)
Charging trays for AA/AAA rechargeable batteries available as spare
part
(Item no. PBC400DRAAA
Power cable. 4 charging trays for 4 AA/AAA rechargeable batteries
each.