Palmer BC 400 AA Bedienungsanleitung Seite 4

30. IMPORTANT INFORMATION: Replace fuses only with fuses of the same type and rating. If a fuse blows
repeatedly, please contact an authorised service centre.
31. To disconnect the equipment from the power mains completely, unplug the power cord or power
adapter from the power outlet.
32. If your device is equipped with a Volex power connector, the mating Volex equipment connector
must be unlocked before it can be removed. However, this also means that the equipment can slide and
fall down if the power cable is pulled, which can lead to personal injuries and/or other damage. For this
reason, always be careful when laying cables.
33. Unplug the power cord and power adapter from the power outlet if there is a risk of a lightning strike or
before extended periods of disuse.
The warning triangle with lightning symbol indicates dangerous uninsulated voltage inside the
unit, which may cause an electrical shock.
The warning triangle with exclamation mark indicates important operating and maintenance
instructions.
Warning! This symbol indicates a hot surface. Certain parts of the housing can become hot
during operation. After use, wait for a cool-down period of at least 10 minutes before handling or
transporting the device.
Warning! This device is designed for use below 2000 metres in altitude.
Warning! This product is not intended for use in tropical climates.
SAFETY INFORMATION ABOUT THE CHARGER AND RECHARGEABLE BATTERIES
1. The battery charger is exclusively suitable for rechargeable type AA (Mignon), AAA (Micro), and 9V block
NiCd and NiMH batteries!
2. Exclusively use quick-charging, branded products, preferably nickel metal hydride (NiMH) batteries!
3. Do not recharge single-use batteries!
4. Prior to charging: check all batteries for damage and do not use any damaged batteries!
5. Correctly dispose of damaged and drained batteries at the corresponding collection points!
6. Make sure battery contacts and charging trays are clean and have not oxidized!
7. Do not use the charger in ambient and battery temperatures below 0°C and over 40°C!
8. Do not leave charging batteries unattended!
9. Make sure the polarity of the batteries is correct when you insert them into the charger (see illustrations in
the charging trays)!
10. Do not use different battery cell types simultaneously in one device!
4
CAUTION:
To reduce the risk of electric shock, do not remove cover (or back). There
are no user serviceable parts inside. Maintenance and repairs should be
exclusively carried out by qualified service personnel.