Environmental Protection Information; Warranty & Service - SNAIGE CD290-1004 Betriebsanleitung

Operation problems and their solutions (troubleshooting). What if ...
• The appliance is plugged in to the mains but it does not work and the electricity supply
voltage indicator is not illuminated. Check that your house electricity supply installations are in
order. Check that the plug is correctly inserted into the electricity supply socket.
• The noise has become louder. Check that the appliance is standing stable, on a level place. To
make it level, regulate the front feet. Check if the appliance is not touching any furniture, and that
no part of the refrigeration system at the back part of the appliance body is touching the wall. Pull
the appliance away from any furniture or walls. Check that the cause of increased noise isn't due
to bottles, cans or dishes in the appliance that might be touching each other.
• Water has appeared at the bottom of the refrigerator compartment. Check whether a
thaw water channel space isn't blocked.
intended for that purpose.
• Water has appeared under the appliance. The thaw water collection tray has slipped off the
compressor. Place the tray on top of the compressor.
• When the appliance door is opened, the rubber sealing gasket pulls out. The gasket is
smeared with sticky foodstuffs (fat, syrup). Clean the sealing gasket and the groove for it with
warm water containing soap or dishwashing detergent and wipe dry. Put the rubber sealing gasket
back into the place.
• High temperature in appliance, the compressor operation pauses are short. Ascertain
whether the appliance door/doors are shutting tightly, whether the door wasn't kept open longer
than necessary when taking out or putting in foodstuffs or whether a large amount of warm food
was placed in the appliance.
• The top of the appliance has condensation on it. The ambient relative air humidity is above
60 %. Ventilate the room where the appliance stands and if possible remove the cause of the
humidity.
R e m a r k s o n t h e a p p l i a n c e o p e r a t i n g n o i s e . As the appliance operates and
goes through the freezing cycle, various noises will be emitted. This is normal and is not a
sign of any malfunction.
As the refrigerant circulates around the refrigeration system, it causes sounds like
murmuring, bubbling, or rustling. Louder sounds like popping or clicking may be heard for a
short time as the refrigerator compressor switches on.

ENVIRONMENTAL PROTECTION INFORMATION

If the appliance is no longer in use, cut the connecting cable off the used equipment before
its scrapping. Also, remove the appliance lock or render it useless so that the appliance
presents no danger to children while being stored for di- sposal. This appliance is marked
with a symbol of the crossed out waste container in conformance with the European Directive
2002/96/EC. Such marking informs that the equipment may not be kept together with other waste
coming from the household after the period of its use. The user is obliged to dispose of the appliance
at the waste collection point. The local waste collection points, shops and communal units form an
appropriate system enabling the disposal of the equipment.
Handling the used electrical and electronic equipment properly contributes to the avoidance of
consequences harmful to the human health and natural environment, resulting from the
hazardous substances and improper storage and processing of such equipment.
IF YOUR APPLIANCE IS NOT WORKING PROPERLY, ASCERTAIN WHETHER YOU CAN REMEDY THE
CAUSE OF THE FAULTY FUNCTIONING OF THE APPLIANCE YOURSELF. If you cannot solve the
problem yourself, contact the nearest refrigerator service representative by telephone or in writing.
When making contact necessarily indicate the refrigerator model and number. You will find this data
on the product label, which is glued to the wall.
Clean the thaw water channel space with a cleaner
WARRANTY SERVICE
8
presence of