Warranty; Service; Supplied With; Use For The Intended Purpose - Garant SG1 Bedienungsanleitung

1.2

Warranty

We expect that the unit will continue to perform safely and accurately for many years. This is guaranteed
however only if the instructions for operation, servicing and repair are complied with.
During the warranty period, any faults that occur will be rectified under the terms of our warranty
conditions. All consequences of unauthorised changes and modifications are chargeable to the operating
company. This applies in particular to any changes that affect the safety of the unit.
We offer warranty exclusively for original spare parts.
Nothing in this operating manual shall constitute an extension of our conditions of sale and delivery.
1.3

Service

The comprehensive product and service range of the Hoffmann Group is available in more than 30 Euro-
pean countries and in China – certainly we have a branch near to you.
Look at our overview at the end of the operating manual to find the Hoffmann partner who is near to you
to respond to your enquiries and give advice.
You will find the serial number on the rating plate on the side panel of the unit (see "Rating plate", Page 35).
1.4

Supplied with

1 Induction unit SG1
1 Base holder HSK63/HSK100
5 Interchangeable cooling inserts ⌀ 6–32 mm
4 Screening plates ⌀ 3–32 mm
1 Clamping ring for screening plates
1 Pair safety gloves
1 Operating manual
1.5

Use for the intended purpose






www.hoff mann-group.com

Contact cooling
Positively driven contact cooler
Contour-dependent cooling using the
cooling inserts, to avoid damage to the
tool edge

High-power coil
Hand-held coil with weight
compensation. Maximum shrinkable
tool length = 400 mm.

Cooling inserts
Storage for cooling adapters

Screening plates
A variety of screening plates for sizes
⌀ 3–32 mm. Optional screening plates
for shrink collet chuck

Base tool holder
Taper reduction available for all shanks
DE DE
EN
FR FR
IT IT
ES ES
CZ CZ
PL PL
RU RU
ZH ZH
31