Anschluss und Inbetriebnahme der LEDs •
Press the button (˅) once (1 second).
6
The LED will switch off.
Brightness of the LED
The stop button in the middle of the remote control has the function to switch the brightness of the LED by 3 steps.
From the smallest to the highest level. The fourth and brightest level can only be selected by pushing the upper button (^).
•
Assembly the cover to the transformer.
•
Put the transformer into the square bar.
•
Put the main cable to the hole into the back side of square bar. Switch on the main cable of the transformer to the electricity.
•
Assembly the side cover of the awning.
Connecting and commissioning of the LEDs
If everything works, disconnect
transformer from the power
(electricity).
7
www.paramondo.de
45