Paramondo Summer Montageanleitung Seite 43

Anschluss und Inbetriebnahme der LEDs •
Connect the remote control with the transformer.
Attention: You have 5 seconds from switching on the transformer to connect transformer with the remote control.
If you can't make it within 5 seconds, switch off the transformer from the electricity, wait 10 seconds, switch on the transfor-
mer to the electricity and repeat below steps.
Press the button in the transformer and the button on the remote control simultaneously. Keep pressing these two buttons
by 5 - 6 seconds. The LEDs in the awning arms should blink. After 5 - 6 seconds the programming is done.
1
Connecting and commissioning of the LEDs
www.paramondo.de
43