Herunterladen Diese Seite drucken

Omnitronic HR-15 Bedienungsanleitung Seite 2

Vorschau ausblenden Andere Handbücher für HR-15:

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

USER MANUAL
EN
Thank you for purchasing this horn speaker. The speaker is especially designed
for applications in PA systems operating with 100 V technology. The speaker is
protected against splash water and thus can be used in outdoor areas. The
connection must be made by skilled personnel only. Please read these operating
instructions carefully before using the product. They contain important
information for the correct use of your product. Please keep them for future
reference.
SAFETY INSTRUCTIONS
Only use the product according to the instructions given herein. Damages due
?
to failure to follow these operating instructions will void the warranty! We do not
assume any liability for any resulting damage.
We do not assume any liability for material and personal damage caused by
?
improper use or non-compliance with the safety instructions. In such cases,
the warranty will be null and void.
Unauthorized rebuilds or modifications of the product are not permitted for
?
reasons of safety and render the warranty invalid.
This product is not a toy. Keep it out of the reach of children. Do not leave
?
packaging material lying around carelessly.
This product is in accordance with protection grade Ip44 and can be used in
?
outdoor areas. However, do not immerse the product in water, this will destroy
it.
The product withstands great cold and heat. The recommended temperature is
?
-30 to +60°C.
Speaker cables are sensitive to electrical interference. Hence, it is
?
recommended to lay them at a distance of several meters to sources of
interference (e.g. dimmers, light switches).
Make sure that the product is installed securely and cannot fall down. Serious
?
injury to persons can be caused if the speakers fall down. Comply with the
standards and rules that apply in your country.
For commercial use the country-specific accident prevention regulations of the
?
government safety organization for electrical facilities must be complied with at
all times.
Make sure that impedance and power rating specified in the technical data
?
match the connected amplifier's data. Otherwise, the speakers or the amplifier
may be damaged. The total impedance for the connected speakers must not be
less than the minimum impedance for the amplifier.
This product is maintenance-free, except for occasional cleaning. You can use
?
a slightly dampened cloth for cleaning.
Never open the product. If this product is no longer working properly or is
?
visibly damaged, take it out of operation and consult your local dealer. Do not
attempt to repair the product yourself.
PROTECTING THE ENVIRONMENT
When to be definitively put out of operation, take the product to a local
recycling plant for a disposal which is not harmful to the environment.
Devices marked with this symbol must not be disposed of as household
waste. Contact your retailer or local authorities for more information.
© 2019 Omnitronic. All rights reserved • Omnitronic is a brand of Steinigke Showtechnic GmbH • Andreas-Bauer-Str. 5 • 97297 Waldbüttelbrunn, Germany
HR-15/HR-25
WEATHER-PROOF HORN SPEAKER 100V
ELECTRICAL CONNECTION
During operation, there is a hazard of contact with a voltage of up to 100 V at the
connection wires. The installation must be carried out by skilled personnel only.
Observe the load of the PA amplifier by the speakers. An overload may damage
the amplifier! The total power of all speakers connected must not exceed the
amplifier power.
Mount the speaker to the wall using the bracket.
?
If the PA system is turned on, turn it off before making any connection.
?
Connect the speaker via two of the cables to the 100 V output of the PA
?
amplifier: core COM (negative pole) and, according to the desired power rating,
one of the other colored cores (see Technical Specifications). Always insulate
the connection cables which are not used.
When connecting several speakers, make sure that all speakers have the same
?
polarity and that the amplifier is not overloaded.
TECHNICAL SPECIFICATIONS
Model / item no.:
HR-15 / 80710830
Input voltage:
100 V
Rated power (RMS):
10 W (brown)
20 W (blue)
COM (black)
Connection:
Open cable ends
Sensitivity:
110 dB
Frequency range:
400-8000 Hz
Dim. in mm (Ø x H):
195 x 235
Weight:
1.2 kg
Subject to change.
www.omnitronic.de
HR-25 / 80710834
100 V
15 W (brown)
30 W (blue)
COM (black)
Open cable ends
110 dB
300-8000 Hz
310 x 348
1.8 kg
Publ. 05/2019

Werbung

loading

Diese Anleitung auch für:

Hr-25