Operation; Energy Saving Tips; Using The Cooler - Waeco COOLY CX-25 Bedienungsanleitung

_CX-25_CX-30.book Seite 17 Freitag, 12. März 2004 7:40 07
CX-25, CX-30
6

Operation

Before starting your new cooling device for the first time, you
should clean it inside and outside with a damp cloth for hygienic
reasons (please also refer to the "Cleaning and care" chapter on
page 18).
6.1

Energy saving tips

Choose a well ventialated installation location which is protected against
direct sunlight.
Allow food to cool down first before placing it in the device.
Do not open the cooling device more often than necessary.
Do not leave the lid or door open for longer than necessary.
6.2

Using the cooler

➤ Place the coolbox on a firm base.
➤ Connect the coolbox
– With the cable supplied (see fig. 3, page 3, 2) to an AC mains power
socket or
– Using the connection cable supplied to the cigarette lighter in your
vehicle (see fig. 3, page 3, 1).
Close the coolbox by pushing down the lid and turning the handle
forward. After a short time, you can check the inside of the lid to
see whether the coolbox is working properly.
✓ After a certain period of time, the temperature inside the container will
cool down by up to 20 °C.
Ensure that the objects placed in the cool box are suitable for cool-
ing/warming to the selected temperature.
➤ If you wish to switch off the device, pull out the connecting cable.
Operation
17