Cleaning; Replacement Parts; What To Do If - Olsberg Palena-Compact Anleitung

Cleaning

What?
Inside of stove
Connection piece
Glass panel

Replacement parts

Attention:
Please ask your specialist trader for any replacement
parts required. Always use original spare parts only.
In order to process your order as quickly as possible,
it is imperative that you send us the type and fabrica-
tion number given on the stove's rating plate.
The stove identification plate is situated on the left
hand side in the wood storing compartment.

What to do if?

The stove doesn't draw properly?
•
Is the chimney or the stovepipe not air tight?
•
Has the chimney been incorrectly designed?
•
Is the external temperature too high?
•
Are the doors of other fireplaces connected to the
chimney open?
The room doesn't get hot?
•
Is the heating requirement too high?
•
Is the waste gas pipe blocked?
•
Is the primary air controller closed?
•
Is the chimney draught too low?
•
Is the wood used as fuel not dry?
How often?
at least 1x per year
at least 1x per year
as required
We recommend the relevant numbers here before
installing the stove to ensure that you always have
them to hand:
Type number:
Fabrication number:
The stove gives off too much heat?
•
Has the primary air controller been opened too
wide?
•
Is the delivery pressure too high?
The grate becomes damaged or slags are
formed?
•
The stove was overloaded.
•
The ash pan was not emptied in good time.
•
Is the ash door not tightly closed?
•
Is the delivery pressure too high?
Using what?
hand brush,
vacuum cleaner
hand brush,
vacuum cleaner
when cold,
using glass cleaner for stoves and
over glass
23/________________
__________________
13