Safety Rules - Beko CLEARPOINT S040 TWC Control Installation Und Betriebsanleitung

Please check whether or not these instructions
correspond to the CLEARPOINT compressed-air
heater (S040/S055 TWC type).
Application
Application is restricted to compressed air and inert gases
of fluid group 2 in accordance with the 97/23/EC European
Guideline concerning pressure devices (Pressure Equipment
Directive). Abusive employment of the compressed-air heater
for the heating of other media or for purposes other than the
heating of compressed air or of inert gases of fluid group 2 is
not allowed. The application in ex-areas is also not allowed.
The compressed-air heater is employed mainly where aerosols
and condensate, developing through cooling of the compressed
air, lead to disturbances:
• Malfunctions of measurement & control instruments
• Water blisters during spray painting
• Premature wear of tools as a result corrosion
• Freezing-up of valves and control elements during fast expan-
sion of compressed air
The compressed-air heater will only function when the indicated
operating voltage is applied.

Safety rules

• It is essential to observe the instructions for installation
and operation!
Danger !
Compressed air !
Risk of serious injuries or death through the contact with
quickly or suddenly emerging compressed air or through
bursting plant components.
Use pressure-resistant installation material!
Make sure that no persons or objects can be hit by condensate
or emerging compressed air.
Caution!
Carry out installation and maintenance works only when the
system is pressureless, deactivated and cooled down!
Measures:
• Do not exceed the maximum operating pressure (see
identification plate)
• Use pressure-resistant, metallic installation material
only!
Compressed-air supply and takeoff must be piped firmly.
As a result of the temperature development at the device, do
not employ plastic pipes. Make sure that persons or objects
cannot be hit by condensate which may be found inside the
device.
• Avoid chemically aggressive environments or cleaning
with aggressive agents, as these may affect the material
of the pressure vessel!
• Do not carry out repair works on the device on your
own! Defective devices must be returned to the manu-
facturer!
CLEARPOINT S040 / S050 TWC Control
Danger!
High temperature at the housing!
Burns can result from the contact of unprotected parts of
the body with the hot housing (up to +80°C). Risk of fire
through easily inflammable objects, dusts and gases.
Caution!
Carry out installation works only when the system is pressure-
less, deactivated and cooled down!
Measures:
• Keep distance from the housing. Check the temperature
prior to touching it.
• Do not exceed the maximum compressed-air tempera-
ture (see identification plate)!
• Employ contact protection (recommended accesso-
ries).
• Use only suitable material for thermal insulation of the
device (200°C).
• Do not carry out repair works on the device on your
own! Defective devices must be returned to the manu-
facturer!
Danger!
Mains voltage!
There is the risk of an electric shock involving injury or
death when coming into contact with non-insulated com-
ponents carrying mains voltage.
Caution!
Carry out installation works only when the system is pressure-
less, deactivated and cooled down! All types of electrical works
must be implemented by authorised and qualified personnel
only.
Measures:
• During electric installations, all regulations need to be
observed (VDE 0100)! In addition, national rules and
safety regulations regarding the dealing with electrical
devices must be adhered to!
• The connecting cable of the device must not come into
contact with the housing of the compressed-air heater!
• Do not use the compressed-air heater in ex-areas.
• Do not carry out repair works on the device on your
own! Defective devices must be returned to the manu-
facturer!
english
9