Technical Specifications; Cleaning & Maintenance; Disposal And Recycling - Kawasaki K-AC 6-1200 Originalbetriebsanleitung

manufacturer or the manufacturer's customer
service or a similarly qualified person.

8. Technical Specifications

Mains connection:
Idle speed:
Operating pressure:
Pressure vessel volume (in liters):
Theo. suction power l/min:
Lubrication type:
Sound power level L in dB:
wA
Uncertainty K :
wA
Sound pressure level L in dB:
pA
Uncertainty K :
wA
Protection class:
Device weight in kg:
Power consumption:
Noise
The noise emission values were determined
according to EN ISO 2151.
9. Cleaning, maintenance
Danger!
After working with the machine, always remove
the plug from the socket.
Warning!
Wait until the compressor has cooled completely.
Risk of burns!
Warning!
Before performing any cleaning and maintenance
work, depressurize the vessel.
Warning!
Do not allow water, oil or dirt to enter into the
machine.
Warning!
From time to time, examine the safety valve for
damage.
9.1 Water condensation:
Drain off any water condensation every day by
opening the drain valve (bottom side of the
pressure vessel).
9.2. Safety valve:
The safety valve is set to the maximum
permissible pressure of the pressure vessel. It
is not permitted to adjust the safety valve or to
remove the seal.
220-240 V ~/ 50 Hz
9.3 Cleaning the suction filter
3450 /min
• The copper filter provides protection against the
Max. 8 bar
ingress of foreign bodies and dust.
6
• This filter must be cleaned or replaced whenever
180
there is a loss of performance, or no later than
oil free
after 100 operating hours.
96dB(A)
• Smaller dust deposits can be cleaned with a
3 dB(A)
brush or with a compressed air gun.
76dB(A)
• If contaminations of the filter are more severe,
3 dB(A)
soak the filter in petrol for three minutes and
IP20
then clean it carefully. Then blow-dry.
approx. 10 kg
1.2 KW
9.4 Storage
Store devices in a safe place. When the device
is not in operation it should be stored in a dry
place, at an elevated or locked place out of the
reach of children.
9.5 Repair
For your safety, damaged power cords and
connectors must be replaced immediately;
do not use or operate devices with damaged
power cords. Repairs and maintenance work
shall be performed only by authorized, qualified
personnel. We recommend that you contact our
service center when required.

10. Disposal and recycling

Old appliances contain valuable recyclable
materials, which should be forwarded to a
recycling system for reuse of these materials, and
to prevent harm to the environment or human
health due to uncontrolled waste disposal. Please
dispose of your old appliances via appropriate
collection systems or send the appliance to the
seller from whom you bought it. The seller will
then forward the appliance for material recycling.
15
Within the EU this symbol indicates that
this product must not be disposed of as
domestic waste.
UK