Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
5
Menu
In order to enter „programming mode", press and hold the keys ENTER and ESC simultaneously
for 2 seconds.
Note: The values within brackets [x] are the default settings.
Program
Function
no.
P00
Options to leave the menu:
(1) Discard changes and return to normal measuring mode
(2) Save changes and return to normal measuring mode
(3) Save changes as „standard user setting" and return to normal measuring
mode
(4) Restore „standard user setting" when parameters have been changed
unintentionally. To do so, press and hold the ENTER key for at least 10 seconds.
If the reset was successful, "USER SETTINGS RESTORED" will appear in the
display.
P01
Wind sensor selection:
(0) wind speed meter only, [0]
(1) wind direction meter only,
(2) wind speed meter + wind direction meter
P02
Setting the input for the wind speed:
For P01 = 0 and P01 = 2 only
(0) pulse input, [0] (1) 4 ... 20 mA input (2) radio sensor
P03
Setting the input for the wind direction:
Forr P01 = 1 and P01 = 2 only
(0) 4-20 mA input, [0] (1) radio sensor
P04
Unit:
(0) km/h, [0] (1) mph (2) m/s
P05
For P02 = 0 only
Displayed reference speed (1-999) [100]
P06
For P02 = 0 only
Frequency [Hz] for visualisation of the programmed value in P05 [121]
P07
For P02 = 0 only
Ratio offset = speed / frequency [3]
P08
Selection of maximum measurement range (wind speed)
For P02 = 1 only
(0) 120 km / h, [0] (1) 180 km / h
P09
Selection of maximum measurement range (wind direction)
For P03 = 0 only
(0-359) [0]
P10
ALARM 1
(0) deactivated (1) normally open contact (NO), [1] (2) normally closed contact
(NC)
P11
ALARM 1
Threshold value (1-999) [50]
P12
ALARM 1 mode
(0) Continuous alarm (1) pulsating alarm [1]
P13
ALARM 1
For P12 = 1 only
Switch-on time when pulsating alarm is activated in 0.1 s (1-99) [10]
© PCE Instruments
18
Werbung
Inhaltsverzeichnis
