Tarm 2.5 Bedienungsanleitung Seite 16

Manual: tarm 2.5
Channel
12 Color effects
extended
13 Strobe
14 Operation mode
15 Scan speed
16 Safety zone size
17 Safety zone intensity
18 Blanking
19 Blankshift
page 16 / 29
Mode Value
DJ 0 - 127
128 - 192
193 - 255
DJ 0 - 15
16 - 255
DJ 0 - 19
20 - 83
84 - 147
148 - 211
212 - 233
234 - 255
DJ 0 - 31
32 - 255
DJ 0 - 63
64 - 127
128 - 191
192 - 255
DJ 0
1 - 128
129 - 255
DJ 0 - 192
193 - 255
DJ 0 - 192
193 - 255
Function
Smooth color fade effect to the re-color effect
Value of channel 11 must be >15!
Blocking color effect to the re-color effect
Value of channel 11 must be >15!
Automatic change of color fade effects
(increasing speed)
None
Increasing strobe effect
DMX
Automatic position X & Y-axis
Automatic position X-axis
Automatic position Y-axis
Demonstration mode
Sound-to-light
Default
Increasing scan speed (from 5 kpps to 30 kpps)
ATTENTION: Make sure not to overload the
scanners! If you're unsure about the maximum
scan speed, stay with the default setting!
Size of horizontal safety zone
Safety zone is the bottom side
Size of horizontal safety zone
Safety zone is the upper side
Size of vertical safety zone
Safety zone is the left side
Size of the vertical safety zone
Safety zone is the right side
No reduction
Decrease brightness up to half brightness
Decrease brightness up to blackout
Manual select how much of the laser pattern
shall be blanked
Automatic blanking (increasing speed)
Manual select the pattern part the blanking of
channel 18 shall be applied to
Automatic blank shift (increasing speed)