Troubleshooting - Philips HD9388 Bedienungsanleitung

Fill the kettle with white vinegar (8% acetic acid) up to one quarter of
1
the MAX indication.
Add water to the MAX indication.
2
Press the green tea button to heat up the water to 80ºC and then
3
press the KEEP WARM button.
Empty the kettle after 30 minutes and rinse the inside thoroughly.
4
Repeat the descaling procedure if there is still some scale in the
5
kettle.
Note: You can also use an appropriate descaler. In that case, follow the
instructions on the package of the descaler.
Descaling the kettle (hD9386/hD9388)
If the kettle needs to be descaled, the calc light lights up on the display of
the base.
Fill the kettle with white vinegar (8% acetic acid) up to one quarter of
1
the MAX indication.
Add water to the MAX indication.
2
To start the descaling process, press the black tea button and the
3
personal setting button at the same time (Fig. 20).
The kettle heats up the water to 80ºC.
,
During the descaling process, the calc light slowly pulsates until the
,
descaling process has finished.
The display counts down the time of the descaling process (30
,
minutes) in steps of 5 minutes. The time on the display slowly pulsates.
When the descaling process is finished, you hear an audible signal and
,
the appliance switches off automatically.
Follow steps 4 and 5 in section 'Descaling the kettle (HD9380/
4
HD9384)' above.
Note: If you take the kettle off the base before the descaling process is finished,
the appliance switches off automatically. You can also deactivate the descaling
process by pressing any of the preset buttons.
Note: If you do not descale the kettle, the calc light lights up the next 5 times
you use the kettle.
storage
- To store the cord, wind it around the cord storage facility in the bottom
of the base (Fig. 2).
Ordering accessories
To purchase accessories for this appliance, please visit our online shop at
www.shop.philips.com/service. If the online shop is not available in
your country, go to your Philips dealer or a Philips service centre. If you have
any difficulties obtaining accessories for your appliance, please contact the
Philips Consumer Care Centre in your country. You find its contact details in
the worldwide guarantee leaflet.
Environment
- Do not throw away the appliance with the normal household waste
at the end of its life, but hand it in at an official collection point for
recycling. By doing this, you help to preserve the environment (Fig. 21).
guarantee and service
If you need service or information or if you have a problem, please visit
the Philips website at www.philips.com/support or contact the Philips
Consumer Care Centre in your country. You find its phone number in the
worldwide guarantee leaflet. If there is no Consumer Care Centre in your
country, go to your local Philips dealer.

troubleshooting

This chapter summarises the most common problems you could encounter
with the appliance. If you are unable to solve the problem with the
information below, visit www.philips.com/support for a list of frequently
asked questions or contact the Consumer Care Centre in your country.
Signal Meaning/solution
The light ring around After the water has reached the set
one preset button lights temperature, the light of the selected preset
up while the other light button stays on for 5 minutes.
rings are off.
The light ring of the The temperature of the water is higher
preset button I pressed than the temperature of the selected preset
flashes 3 times. button.
Signal Meaning/solution
E5 appears on the The kettle is out of order. Contact an
display. authorised Philips service centre or the
Consumer Care Centre in your country.
The kettle beeps. The water has reached the set temperature.
Problem Possible solution
I cannot set The current temperature of the water in the kettle
the desired is probably higher than the temperature you want to
temperature. set. You can add cold water to the kettle. If you wish
to reheat the water immediately, you can only select
100ºC.
I try to switch When there is no water in the kettle, the boil-
on the kettle but dry protection trips and the kettle switches off
it switches off automatically. You may need to put more water in
automatically. the kettle (at least 0.25 litres).
The kettle is not placed on its base correctly.
Remove the kettle from the base and correctly place
it on the base again.
The kettle The kettle keeps the water warm for 30 minutes and
switches off then switches off automatically. To keep the water
automatically warm longer, press the KEEP WARM button again
when the keep- after it has finished.
warm function is
active.
DEUtsCh
Einführung
Herzlichen Glückwunsch zu Ihrem Kauf und willkommen bei Philips! Um das
Kundendienstangebot von Philips vollständig nutzen zu können, sollten Sie
Ihr Produkt unter www.philips.com/welcome registrieren.
Allgemeine Beschreibung (Abb. 1)
1 Deckel
2 Ausgießer
3 Wasserstandsanzeige
4 Deckelentriegelungstaste
5 Aufheizsockel
6 Aufheizsockel-Anschluss
7 Kabelaufwicklung
8 Netzstecker
9 Taste für schwarzen Tee
10 Taste für grünen Tee
11 Taste für Kräuter-/Früchtetee
12 Taste für Instant-Kaffee
13 40 ºC-Taste
14 KEEP WARM-Taste
15 Taste für Instant-Suppe/heiße Schokolade
16 Taste für persönliche Einstellungen
17 Taste für Rooibuschtee
18 Pfeiltasten
19 CALC-Anzeige
20 Display
Wichtig
Lesen Sie diese Bedienungsanleitung vor dem Gebrauch des Geräts
aufmerksam durch, und bewahren Sie sie für eine spätere Verwendung auf.
gefahr
- Tauchen Sie den Wasserkocher und den Aufheizsockel niemals in
Wasser oder andere Flüssigkeiten.
Warnhinweis
- Prüfen Sie, bevor Sie das Gerät in Betrieb nehmen, ob die
Spannungsangabe auf dem Gerät mit der örtlichen Netzspannung
übereinstimmt.
- Benutzen Sie das Gerät nicht, wenn der Stecker, das Netzkabel, der
Aufheizsockel oder das Gerät selbst beschädigt ist.
- Um Gefährdungen zu vermeiden, darf ein defektes Netzkabel nur von
einem Philips Service-Center, einer von Philips autorisierten Werkstatt
oder einer ähnlich qualifizierten Person durch ein Original-Ersatzkabel
ersetzt werden.