Tuthill FILL-RITE TN700 series Eigentümer-, Einbau-, Betriebs- Und Sicherheitsanleitung Seite 7

TN Meter Parts (cont'd)
TN 740 / TN 760 Series Meters
Model Pressure
TN740A 1000 PSI / 169 BAR
TN760A 400 PSI / 28 BAR
The calibration screw can correct for normal flow meter wear, and for other liquids within the group identified
above. This flow meter cannot be used on other liquids with significantly different viscosity.
Item * Qty.
1 1
2 1
3 1
4 1
Reference diagram on page 6 for Item numbers.
TN 860 Series Meters
Model Pressure
TN860A 150PSI/10 BAR 6-60 GPM (23-230 LPM) 6-60 GPM (23-230 LPM)
This flow meter has been calibrated for use on a specific liquid viscosity range. The calibration adjuster can correct
for normal meter wear, but not for use on other liquids with significantly different viscosity. To change service to a
different liquid may require different drive & transfer gears (change requires a special tool) and re-calibration.
Item * Qty.
1 1
2 1
3 1
4 1
* Reference diagram on page 6 for Item numbers.
125-5000 cSt
1-10 GPM (4-40 LPM)
1.5-15 GPM (6-57 LPM)
TN740A TN760A
MC8600 MC8800
RK8101 RK8101
RG3000 RG3000
RK3700 RK3700
1-2 cSt
TN860A
MC8800
RK8101
RG3000
RK3700
5-50,000 cSt
0.4-4 GPM (1.5-15 LPM)
0.6-6 GPM (2.3-23 LPM)
Nutating Disc Assembly / Measuring Chamber
Control Plate Assembly
Register Housing and Reset Knob
3-25 cSt *
Description
Nutating Disc Assembly / Measuring Chamber
Control Plate Assembly (Fluorocarbon seals)
Register Assembly
Register Housing and Reset Knob
7
Hydraulic & Lube Oils
Hydraulic & Lube Oils
Description
Register Assembly
Fluid
Water, gasoline, solvents, E85
*Diesel, kerosene, light fuel oil
Fluid