Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
4.
Place the Senator Raised Toilet Seat evenly onto the bowl of the toilet (see Fig.5).
5.
Tighten both of the blue handles together (see Fig. 6) making sure that the Senator
seat remains evenly on the top surface of the toilet bowl (see Fig. 7).
6.
Double check that the front skirt is flat against the bowl and check to see that it is
secure (see Fig. 8).
Fig. 5
CLEANING & MAINTENANCE
Your Senator Raised Toilet Seat has been designed to give you many years of service,
however it is essential that you look after your seat by following these simple instructions.
1.
Clean your seat using a mild disinfectant or an antibacterial cleaning agent. Please
check the suitability of the product before use.
a.
Do not use abrasive cleaners as this will permanently damage the surface
and invalidate any warranty.
b.
Do not use any form of solvent as this will damage the surface and weaken
the product and again invalidate any warranty.
2.
The seat is suitable for industrial cleaning, but can be reissued only if the seal
remains intact.
3.
Dry your seat thoroughly before use.
4.
We recommend that you regularly check your seat, ensuring that the hand wheels
are tight and the seat remains evenly positioned on the bowl. If you suspect that
your seat has moved out of position, please follow the instructions above to move
your seat back into the correct position and retighten all fitments.
Under no circumstances must you stand on the seat or allow others to do so
as this is highly dangerous and will compromise the safety of the user.
If you have to remove the Senator Raised Toilet Seat for any reason, please
ensure that you follow the installation instructions again fully before using.
Failure to do so could compromise the safety of the user.
Fitting and Maintenance Instructions
Fig. 6
3
Fig. 7
Ver. 2 06/2012 (1574)
Fig. 8
Werbung
Inhaltsverzeichnis
