Blumfeldt 10029657 Bedienungsanleitung Seite 13

Cover
Sepcials Instructions on the Pump
Note: Ensure that the electrical cord loops below the electrical outlet to form a "Drip Loop"
This will prevent water from running down the cord into the electrical outlet.
• To avoid electric shock, connect the plug to a grounded outlet only.
• Do not modify the plug.
• Check the voltage on the equipment label before use. Only connect the device to sockets that cor-
respond to the voltage of the device.
• Do not pump flammable liquids
• Do not use with water above 35°C (95°F).
• The pump is to be supplied through a residual current device (RCD) with a rated residual operating
current not exceeding 30mA.
13
Construction of the Pump
Larger Models
Impeller
Cover
Back
Impeller
Smaller Models