Appendix A - Rf Energy Exposure And Product Safety Guide For Portable Radios; Attension; Radio License; Operating Instructions - Radioddity CB-27 Kurzanleitung

Appendix A - RF Energy Exposure and
Product Safety Guide for Portable Radios

ATTENSION!

Before using this radio, read this guide which contains important operating instructions for safe
usage and RF energy awareness and control of compliance with applicable standards and
regulations.
This CB radio uses electromagnetic energy in the radio frequency (RF) spectrum to provide
communications between two or more users over a distance. It uses radio frequency (RF)
energy or radio waves to send and receive calls. RF energy is one form of electromagnetic
energy. Other forms include, but are not limited to, sunlight and x-rays. RF energy, however,
should not be confused with these other forms of electromagnetic energy, which when used
improperly, can cause biological damage. Very high levels of x-rays, for example, can damage
tissues and genetic material.
Experts in science,engineering,medicine,health,and industry work organizations to develop
standards foe safe exposure to RF energy.These standards provide recommended levels of
exposure for both workers and the general public.These recommended RF exposure levels
include substantial margins of protection.
All Radioddity two-way radios are designed,manufactured,and tested to ensure they meet
government established RF exposure levels.In addition,manufacturers also recommend specific
operating instrutions to users of two-way radios.These instructions are important because they
inform users about RF energy exposure and provide simple procedures on how to control it.
Please refer to the following websites for more information on what RF energy exposure how to
control your exposure to assure compliance with eastablished RF exposure limits:
http://www.who.int/en

Radio License

Governments keep the radios in classification, most of the classified radios need to get local
government license and operation is allowed. For this CB-27, the individual license is not required.

Operating Instructions

Do not send more than the rated operating factor of 50% of the time. Press [PTT] key (Push to
Talk) to transmit the signals. Release [PTT] key to receive signals. The transmission of 50% of
the time or less is important because the radio will only produce a measurable RF energy load
in the sense of conforming to the standard.

Protect Your Hearing

1. Use the lowest volume you need for your work.
2. Increase the volume only when you are in a noisy environment.
3. Turn down the volume before connecting a headset or earphone.
4. Limit the time you use headsets or earphones at high volume.