T
RANSMITTING
1 Select the desired zone and channel using the selector and
the Zone or CH/GID keys.
•
In Voting, Voting with Signaling, and Free Channel Call zones,
the channel is seleted automatically.
3 In Conventional zones, press the key programmed as
Monitor or Squelch Off to check whether or not the
channel is free.
•
If the channel is busy, wait until it becomes free.
4 Press the PTT switch and speak into the microphone.
Release the PTT switch to receive.
•
For best sound quality at the receiving station, hold the
microphone approximately 1.5 inches (3 ~ 4 cm) from your
mouth.
•
In Voting and Voting with Signaling zones, the transceiver will
search for the closest repeater and transmit using that repeater'
s frequency.
•
In Free Channel Call zones, the transceiver will search for a
free channel and will begin transmitting on that channel.
R
ECEIVING
1 Select the desired zone and channel using the selector and
the Zone or CH/GID keys.
•
Alternatively, in Conventional zones, you can activate the Scan
function if desired.
•
In Voting and Voting with Signaling zones, the transceiver will
automatically search for the strongest signal and receive on
that frequency.
•
In Free Channel Call zones, the transceiver will automatically
search for any signal and will receive on that channel.
2 When you hear a caller's voice, readjust the volume as
necessary.
18