Bosch CleverMixx MQWPL2000 Gebrauchsanleitung Seite 9

W Risk of injury!
Never connect the appliance to timer switches or remote-controllable
sockets. If the power is interrupted, the appliance remains switched
on and restarts when the power is restored. Switch off the appliance
immediately. Never leave the appliance unattended while it is
switched on! Never leave the appliance switched on for longer than is
necessary to process the ingredients. Immediately after using the
appliance, wait for it to stop. Before replacing accessories or
additional parts which move during operation, the appliance must be
switched off and disconnected from the power supply. Do not operate
the appliance at idle speed. Keep hands clear of rotating parts.
Protect long hair or loose items of clothing to prevent them from
becoming caught in the rotating tools. Use the appliance only with
genuine parts and accessories.
W Risk of scalding!
Take care when processing hot food. Hot food may splash during
processing.
W Important!
It is essential to clean the appliance as described after each use
or after it has not been used for an extended period. X "Care and
daily cleaning" see page 10
Congratulations on the purchase of
your new Bosch appliance. You can find
further information about our products
on our web page.
Contents
Intended use ...............................................8
Safety instructions ......................................8
Overview.....................................................9
Before using for the first time....................10
Tools .........................................................10
Operation ..................................................10
Care and daily cleaning ............................10
Recipes..................................................... 11
Disposal .................................................... 11
Guarantee................................................. 11
Overview
X Fig. A
Base unit
1 Ejector button
2 On/Off switch (multi-level)
a 0 = Appliance switched off
b 1 = Lowest speed
c 4 = Highest speed
d M = Instantaneous switching
(highest speed)
3 Mains cable
4 Apertures for inserting the tools
a Large aperture (with 4 indentations)
b Small aperture
Tools
5 Turbo stirring whisks (x2)
a Worm drive gear
6 Universal cutter*
(separate instruction manual)
* Depending on the model
Safety instructions en
9