Digitus DS-41211 Bedienungsanleitung Seite 9

NOTE: At least one monitor connection to the splitter unit is required when
powering on the source device.
NOTE: The splitter unit is required to connect to the computer before the
computer powered on.
NOTE: The splitter unit is HDCP compliant and requires using a
compliant display when
NOTE: Each output port on the Unit is required to apply the same connection
pattern whenever a DVI-to-HDMI (or HDMI-to-DVI) adapter is used for
HDMI (or DVI) signal conversion between the Unit and the HDMI (or
DVI) display. The mixed (HDMI and DVI) output connections (possible
examples as the following figures shown) may cause signal
degradation. For instance, a 4-Port Unit with one output connection to
a DVI monitor and another output connection to a HDMI monitor via a
HDMI-to-DVI adapter or cable, the output signal could be distorted.
Signal degradation, harmful interference, or equipment malfunction
are less likely to occur if absolute connection consistency is used.
The example of mixed connection pattern should not be used, because of
possible disturbances.
it is connecting to the
A6
HDCP video source.
HDCP-