Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
13.
[STOP/EJECT]
Press to stop the tape on the corresponding deck. When stopped, press again to open the cassette
holder.
14.
[PAUSE]
Press to pause the tape on the corresponding deck. Press again to resume playback.
15.
[RECORD]
Press this button in conjunction with the [PLAY] button to begin recording.
1.
POWER CORD
Plug this cord into a power socket before powering on the unit. If not using the unit for prolonged
periods of time, please remember to turn it off and remove the cord from the socket.
2.
USB PORT
Use the included USB cable to connect this port to an available USB port on your computer when
transferring tapes.
3.
GAIN KNOB
This knob can be used to adjust the audio signal from the unit to your computer. If you experience
distortion and clipping when recording to your computer, we recommend turning down the Gain.
If the audio level from the unit is extremely low when recording to your computer, we recommend
turning up the Gain.
4.
REC INPUT
Connect a stereo RCA cable from an external source to this input. Please note that recording and
dubbing only works on deck B.
5.
PLAY OUTPUT
This is the combined audio output from deck A and deck B. Connect a stereo RCA cable from this
output to the Line or Auxiliary input of a home stereo receiver system.
OPERATING PROCEDURES
12
Werbung
Inhaltsverzeichnis
