Cancelling The Programme - Beko HTV 8744 X00 Bedienungsanleitung

5.17.4 Changing the
auxiliary function, spin
speed and temperature
Depending on the step the programme has
reached, you can cancel or select auxiliary
functions. See, "Auxiliary function selection".
Also, you can change the spin speed,
temperature and drying settings. See, "Spin
speed selection" and "Temperature selection".
C
INFORMATION
• The loading door will not open if the
water temperature in the machine
is high or the water level is above
the loading door baseline.
5.18 Child Lock
Use Child Lock function to prevent children
from tampering with the machine. Thus you can
avoid any changes in a running programme.
C
INFORMATION
• You can switch the machine on and
off with On / Off button when the Child
Lock is active. When you switch on
the machine again, programme will
resume from where it has stopped.
• Machine will give an audio alarm
when the buttons are pressed
if the child lock is active.
5.18.1 To activate the child lock:
Press and hold 2nd and 3rd auxiliary
function buttons for 3 seconds. After
the countdown as "Child Lock 3-2-1" on
the display is over, "Child Lock Enabled"
appears on the display. You can release
2nd and 3rd Auxiliary Function buttons
when this warning is displayed.
29 / EN
5.18.2 To deactivate the child lock:
Press and hold 2nd and 3rd auxiliary
function buttons for 3 seconds. After
the countdown as "Child Lock 3-2-
1" on the display is over, "Child Lock
Enabled" is turned off on the display.
Malzeme rengi ARC 716
Colour of material is ARC 716

5.19 Cancelling the programme

10.5
INLAY STOCK NO:
2846559001
1400
1400
1000
1000
800
800
600
600
20° 20°
The programme is cancelled when the
machine is turned off and on again. Press
and hold On / Off button for 3 seconds.
After the countdown as "3-2-1" on the
display is over, the machine turns off.
C
INFORMATION
• If you press On / Off button when the
Child Lock is active, the programme
will not be cancelled. You should
cancel the child lock first. Countdown
as "3-2-1" appears on the display.
• If you want to open the loading door
after you have cancelled the programme
but it is not possible to open the loading
door since the water level in the machine
is above the loading door baseline,
then turn the Programme Selection
knob to Pump+Spin programme and
drain the water in the machine.
Extra Kurutma
Extra Kurutma
Dolap Kuruluğu
Dolap Kuruluğu
Ütü Kuruluğu
Ütü Kuruluğu
30'
30'
90'
90'
150'
150'
Washer-Dryer / User's Manual