Herunterladen Inhalt Inhalt Diese Seite drucken

Cleaning Instructions - Domo DO1950S Gebrauchsanleitung

Vorschau ausblenden Andere Handbücher für DO1950S:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 21
www.domo-elektro.be
INSTRUCTIONS FOR USE
1. Place the slicer on a flat, stable support, in order to prevent it from sliding away.
2. Make sure that the safety button is set to "0" before putting the power supply cord
into the socket. Use an alternating current plug, which is suitable for the voltage
shown on the appliance.
3. Place the food tray at the side of the appliance to catch the slices.
4. Set the desired slice thickness by turning the knob. The slice thickness can be set
from 1 to 35 mm. After each use, set the slice thickness knob back to 0. The slicer
can be used to slice meat, bread, vegetables or cheese.
5. Place the food onto the food sled.
6. To spin the blade: slide the safety button to position 1 and hold. Simultaneously
press the contact button to slice. If at this point you release the safety button,
followed by the contact button, the appliance will automatically continue to slice.
The safety button is set to 0.
Caution: Be extra careful while slicing.
7. Slice the food by pushing the food sled forward. Use the press plate to push the
food against the blade. Always slice the food using the food sled and if possible
the press plate to avoid the risk of injuries.
Caution: Do not use the appliance for longer than 10 minutes at a time.
8. Slide the safety button shortly back to position 1 to stop slicing. The safety button
as well as the contact button will now jump to 0.
9. Make sure that the safety button is always set to 0 when you are done slicing.

CLEANING INSTRUCTIONS

Always unplug the slicer before cleaning.
Never immerse the appliance in water
Before cleaning the appliance, set the slice thickness to "0".
Remove the blade from the slicer by turning the screw in the middle of the blade
clockwise, using a large coin or a screwdriver. Be careful when removing the
screw and the blade.
Clean the blade with a damp cloth and mild detergent. Dry thoroughly. Be careful
while handling the very sharp blade. Do not touch the blade with bare hands.
Clean the press plate and the food sled and dry thoroughly.
You can clean the rest of the appliance with a soft, damp cloth and maybe some
mild detergent.
Do not use any sharp objects to remove the dirt.
31
DO1950S

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis