Specifications; Safety Precautions - Eufab 16475 Bedienungsanleitung

GB Magnetic mobile phone holdert
Item number 16475
Content
1. Proper use of the product
2. Scope of delivery

3. Specifications

4. Safety precautions

5. Operating instructions
5.1 Using the round counter plate
5.2 Using the square counter plate
5.3 Mounting the magnetic holder
5.4 Securing the mobile device to the magnetic holder
5.5 Setting the viewing angle
5.6 Unfastening the magnetic holder
6. Maintenance and care
7. Notes regarding environmental protection
8. Contact information
WARNING
Read the operating instructions through carefully prior to initial use and observe all of the safety notes!
Not observing such may lead to personal injury, damages to the device or your property!
Store the original packaging, the receipt and these instructions so that they may be consulted at a later date! When passing on the product, please
include these operating instructions as well. Please check the contents of package for integrity and completeness prior to use!
1. Proper use of the product
The magnetic mobile phone holder is used to secure mobile phones, smartphones and navigation devices to the windshield or interior of a vehicle.
This device is not designed to be used by children or persons with limited mental abilities or without experience and/or lack of required specialist knowledge. Keep children away
from the device.
Utilisation according to the intended purpose also includes the observance of all information in these operating instructions, particularly the observance of the safety instructions.
Any other utilisation is considered to be contrary to the intended purpose and may lead to material damages or personal injuries. EAL GmbH assumes no liability for damage
resulting from improper use.
2. Scope of delivery
1 x magnetic holder 1 x magnetic counter plate, round 1 x instructions
3. Specifications
Magnetic counter plate, round:
Magnetic counter plate, square:
4. Safety precautions
• The warning triangle labels all instructions important to safety. Always follow these otherwise you could injure yourself or damage the device.
• Children may not play with the device.
• Cleaning and user maintenance may not be carried out by children without supervision.
• Do not treat packaging material carelessly. This may become a dangerous plaything for a child!
• Only use this product for its designated purpose!
• Do not manipulate or disassemble the device!
• For your own safety, only use accessories and spare parts that are stated in these instructions or that are recommended by the manufacturer!
• The magnetic mobile phone holder may not restrict the vision of the vehicle's driver.
• The magnetic mobile phone holder may not hinder the vehicle's driver.
• The magnetic mobile phone holder may not be mounted in the air-bag region. For more information, read the manual of your vehicle or ask your specialist workshop.
5. Operating instructions
5.1 Using the round counter plate
The round counter plate is adhered to the rear of the mobile device. Before mounting, clean the rear of your
mobile device to ensure it is free from dirt, dust and grease. Remove the protective film from the adhesive
surface of the magnetic plate. Place the magnetic plate centrally on the rear of your mobile device and push
down firmly.
The counter plate can be removed from your mobile device by carefully lifting the counter plate from the rear
of the mobile device using the blade of a knife.
Do not use aggressive cleaners or solvents to remove adhesive residue.
For more information, read the care notes for your mobile device.
Ø 42 mm Diameter of suction cup:
65 x 45 [mm]
1 x magnetic counter plate, square
62 mm
Figure 1: Utilising the round counter plate
The adhesive may cause permanent discolouration of the device
surface at the point at which the adhesive was applied.
3
3
3
3
3
3
3
4
4
4
4
4
4
4
3