aidapt Solo VY series Aufbau- Und Wartungsanleitung Seite 3

We recommend that if you are in any doubt, you consult a reputable fixing supplies
company such as Hilti or Fischer.
Never install any hinged arm support directly onto plaster board, MDF
(medium density fibreboard), chipboard or other composite material. This will
seriously compromise the safety of the user.
Never drill through pre-stressed concrete to install a hinged arm support.
Always check for concealed electrical cables when installing hinged arm supports. Also check
your legal requirements under the NICE IC 16th Edition relating to Earth bonding of
extraneous metal parts.
ADJUSTMENT OF LEGS (IF APPLICABLE)
Before fixing a hinged arm support with leg, remove the 'E' clip from the extension leg and
extend the leg to the desired height ensuring you do not exceed the last punched hole of
the extension leg. (see fig. 1).
Once you have achieved the desired height; reinstall the 'E' clip, ensuring that it has passed
through the extension leg and is fitting neatly and snug around the outside leg. (see fig. 2).
Fixing and Maintenance Instructions
3
Ver.6 10/2013 (1570)