Technical Parameters - auna 10006449 Bedienungsanleitung

Tuner Part:
Frequency Range
Intermediate frequency
Signal to noise ratio (S/N)
Play Part:
Signal to noise ratio (S/N)
Channel Separation (1 KHZ)
Voltage Harmonic Distortion
Frequency Response
Amplifier Part:
Output
Speaker Impedance
Power source
Car battery (the negative pole connect ground, see on the unit in detail)
CAUTIONS
When replacing the fuse, please check that the fuse is of the same specification.
1. Install the support on the instrument panel of the car, bend the clamp of
the support.
2. Connect the power wire and speaker wire, fix the fixing piece in the car.
3. Insert the antenna plug, push the main unit into the support, and tighten the fixing nut of the fixing
piece.
Insert two disassembly keys into the left and right gap, make the keys hook the main unit, pull out it
to remove the main unit from the support, then disassemble the connection wire and unplug the
antenna plug.

Technical Parameters

87,5MHz-108MHz
10,7MHz
50>dB
50>dB
50>dB
<5%
100Hz-10kHz (+6dB)
speaker output
4Ω-8Ω
12V DC
Install the main unit