Eufab 16257 Bedienungsanleitung Seite 14

Camera settings (symbol shows a spanner in the top left of the display):
Park mode:
Date/Time:
Auto Power off:
Screensaver:
Beep Sound:
Language settings:
TV mode:
Light frequency:
Flash:
Format:
Defoult setting:
Version:
Mode button (Position 14 in the overview)
Pressing the Mode button multiple times allows you to switch the function modes in the following sequence:
Video mode – Photo mode – Play mode.
Parking mode button (Position 12 in the overview)
Press the Parking mode button before switching the camera off. The „P symbol" will be shown in the top right
of the display. After the camera is switched off, it is in Parking mode, see also the „Gravity sensor" in section
6.5 Functions.
14
If the stop mode is activated, the video recording is saved automatically in the
event of an impact (this recording is not deleted automatically). Three levels may
be set for the severity of the impact.
Switch off – 2G (light impact) – 4G – 8G (serious impact)
Set the date and time using the cursor buttons and confirm each entry by
pressing the OK button. Press the menu button to exit this menu item.
Set whether and when the camera is to switch itself off automatically when in
Standby mode.
Set whether and when the screensaver is to be activated.
Switch the button sounds on/off
Switch off – switch on
Set the menu language and confirm the selected language using the OK
button.
Set the television standard that matches your television.
NTSC – PAL
Set the frequency of the power network of your country.
50 Hz – 60 Hz
You can switch the Power-LED on permanently.
Switch off – switch on
The memory card is formatted, all data is lost.
Cancel – Confirm
The factory settings of the camera are restored.
Cancel – Confirm
Shows the version of the software on the camera.