Eufab 16257 Bedienungsanleitung Seite 13

Gsensor:
Exit the menu using the mode button.
Settings in the photo menu (symbol shows a photo camera in the top left of the display):
Resolution:
Sequence:
Image quality:
Sharpness:
White balance:
ISO:
Exposore:
Anti-Shaking:
Quick overview:
Date stamp:
Exit the menu using the mode button.
In Standby mode:
When the gravity sensor is switched on, a camera in Parking mode will
automatically record a 20 second video in the event of an impact (this recording
is not automatically deleted). Three levels may be set for the severity of the
impact.
Switch off – 2G (light impact) – 4G – 8G (serious impact)
Select the resolution for your photos:
12M – 10M – 8M – 5M – 3M – 2M HD – 1,3M – VGA
The camera takes four pictures in a row
Switch off – switch on
Select the image quality for your photos:
High quality – Standard – Low quality
Select the sharpness setting for your photos:
Strong – Standard – Soft
Set the white contrast for your photos in order to get images that are true to
colour.
Automatic –Sunlight – Cloudy day – Light bulb – Fluorescent tube
Set the sensitivity of the camera.
Automatic – 100 – 200
Here you can set the brightness of the photos.
+2.0 ...+0.0 ... -2.0
Switch the image stabiliser on/off.
Switch off – switch on
Select the preview time for the pictures that have been taken.
Switch off – 2 seconds – 3 seconds
The date is shown on the photo.
Switch off – Date – Date/Time
Briefly press twice opens the menu for the camera settings. With the cursor
buttons (Positions 11 and 13 in the overview), you can select the various menu
items. Press the OK button to open the selected menu item. Use the cursor buttons
to select the setting in the menu item, and confirm by pressing the OK button.
13