EasyWalker DUO Gebrauchsanweisung Seite 21

To secure the right-hand seat, you close the poppers on the right-hand side of the right-
hand seat. Then close the Velcro fastening on the right-hand side of the right-hand seat
around the right frame tube. You attach the Velcro fastening on the left-hand side of the
right-hand seat to the central tube, level with the recess in the fabric of the left-hand
seat. Underneath the seat on the right-hand side, near to the footplate, you take the
tape with the Velcro fastening behind the tube, back through the locking hook of the
short tape and you attach this with the Velcro fastening. You then secure the flap on
the left-hand side of the right-hand seat with the Velcro fastening on the left-hand seat.
Close all poppers.
WARNING: Check that the seat and the carrycot are properly attached to the supporting
!
frame and that they are securely fixed, before you use the EasyWalker DUO.
5-point harness
!
WARNING: Always use the 5-point harness when carrying your child in the seat.
WARNING: Always use the crotch strap in combination with the waist strap when putting
!
your child in the 5-point harness.
The EasyWalker DUO seat is supplied, as standard, with the shoulder straps in the
highest position. You can set the shoulder straps to a lower position, so that smaller
children are seated more comfortably. To do this, click the shoulder straps to release
them from the crotch strap and take the shoulder pads off. Open the zip at the top of the
back support. You can now take the shoulder strap through one of the other openings.
Click the shoulder strap back onto the crotch strap and shut the zip at the top of the back
support (image 14).
The EasyWalker DUO seat is supplied, as standard, with the waist strap in the smallest
position. You can set the waist strap to a larger position so that larger children can be
seated more comfortably. To do this, take the waist strap out of the loop on the base of
the seat (image 15).
You can use the sliding buckles to make the shoulder, hip and waist straps tighter or
looser (image 16).
TIP: The tapes on the rear of the seat that go around the frame, just above the rear
suspension, are part of the harness and provide extra comfort and security for your child.
Ensure that these are always closed around the frame.
Sun canopy
In order to attach the sun canopy place it, with open attachment clips, inside the upper
recesses in the seat fabric, exactly between the rubber caps behind the frame. Click the
attachment clip shut (image 17+18).
To remove the sun canopy, click and release the attachment clip on the sun canopy on
both sides of the push-bar. You can now remove the sun canopy from the frame.
You can also remove just the right-hand side of the sun canopy if, for example, you want
to place a carrycot on the right-hand side of the EasyWalker DUO. To do this, unscrew the
screws in the central connecting piece of the sun canopy. The right-hand sun canopy will
now be loose (image 19).
TIP: Give yourself enough space. Before assembling or dismantling, release the poppers
around the recess in the seat fabric.
EN-19