Electromagnetic Compatibility (Emc) - Axis Panorama PTZ Installationsanleitung

AXIS Panorama PTZ Installation Guide
2
About This Document
This document is intended for administrators and users of
the AXIS Panorama PTZ Network Camera, and provides
help on installing the product - for more information on
operation, please see the online help and the User's
Manual.
Readers are recommended to use this document as a
supplement to the online information available via the
Web-based interface. Later versions of this document will
be posted to the Axis Website, as required.
Safety Notices
Please observe all safety markings when using this
product.
Caution! - Potential hazard that can damage the product.
Important! - Potential hazard that can seriously impair
operation.
Do not proceed beyond any of the above notices until you
have fully understood the implications.
Legal Considerations
Camera surveillance can be prohibited by laws that vary
from country to country. Check the laws in your local
region before using the AXIS Panorama PTZ for
surveillance purposes.

Electromagnetic Compatibility (EMC)

USA -
This equipment generates, uses, and can radiate
radio frequency energy and if not installed and used in
accordance with the instruction manual, may cause
interference to radio communications. It has been tested
and found to comply with the limits for a Class A
computing device pursuant to Subpart B of Part 15 of FCC
rules, which are designed to provide reasonable protection
against such interference when operated in a commercial
environment. Operation of this equipment in a residential
area is likely to cause interference, in which case the user
at his/her own expense will be required to take whatever
measures may be necessary to correct the interference.
Shielded cables should be used with this unit to ensure
compliance with the Class A limits.
Europe -
This digital equipment fulfills the
requirements for radiated emission according to limit B of
EN55022/1994, and the requirements for immunity
according to EN55024/1998 residential, commercial, and
light industry.
Liability
Every care has been taken in the preparation of this
AXIS COMMUNICATIONS
manual; if you detect any inaccuracies or omissions,
<Product Name> Quick User's Guide
please inform your local Axis office. Axis
Communications AB cannot be held responsible for any
technical or typographical errors and reserves the right to
make changes to the product and manuals without prior
notice. Axis Communications AB makes no warranty of any
kind with regard to the material contained within this
document, including, but not limited to, the implied
warranties of merchantability and fitness for a particular
purpose. Axis Communications AB shall not be liable nor
responsible for incidental or consequential damages in
connection with the furnishing, performance or use of this
material.
Trademark Acknowledgments
Acrobat, Adobe, Boa, Ethernet, IBM, Internet Explorer, LAN
Manager, Linux, Macintosh, Microsoft, Netscape Navigator,
OS/2, UNIX, Windows, WWW are registered trademarks of the
respective holders. Java and all Java-based trademarks and
logos are trademarks or registered trademarks of Sun
Microsystems, Inc. in the United States and other countries.
Axis Communications AB is independent of Sun
Microsystems Inc.
Support Services
Should you require any technical assistance, please contact
your Axis reseller. If your questions cannot be answered
immediately, your reseller will forward your queries through
the appropriate channels to ensure a rapid response.
If you are connected to the Internet, you can:
• Download user documentation and firmware
updates
• Find answers to previously resolved problems in the
FAQ database.
• Search by product, category or phrases
• Report problems to Axis support staff by logging in
to your private support area
Visit the Axis Support Web at www.axis.com/techsup/
AXIS Panorama PTZ Network Camera
Installation Guide
Part no: 20676
Revision 1.1
Dated: June 2003
Copyright © Axis Communications AB,
2003